Betadine Stain Removal

Betadine functions as a topical solution. It is used to kill germs. If your family has children, then you are likely acquainted with this chemical, as it is often applied directly to the skin if a cut or scrape occurs. Betadine is an element based in iodine. This means that if it comes into contact with clothing, it will likely leave a stain. Betadine stain removal can be very tricky if you do not know how to remove betadine stains. With a few home ingredients, you can create an at-home betadine stain removal process which will not leave any permanent damage.

Betadine Stain Removal

Pre-Treating Your Clothes

Before you begin the process of removing betadine stains you need to pre-treat your clothing. Should the chemical get on your clothing and begin to stain, it is important that you begin flushing the affected area with cold water. Stay away from hot water in this case because hot water will permanently set in the stain, making betadine stain removal impossible. If your clothing is stained and you are unable to flush the stain, then blot it with a paper towel in order to absorb as much as possible. It is important that you do not rub the area because this can cause the stain to set and then spread to other areas of your clothing. If your clothes are dry-clean only, then the items should be taken directly to your cleaners to remove betadine stains.

Using the Right Agents when Removing Betadine Stains

Rubbing alcohol is the best agent for betadine stain removal. Most households have rubbing alcohol on hand. If you do not, then it can be purchased for just a few dollars from nearly any local drug store or grocery store. Isopropyl rubbing alcohol is meant to clean cuts and scrapes the same as betadine, but it can break apart betadine stains. If you do not have rubbing alcohol on hand, then peroxide can be used as a great substitute. Three percent hydrogen peroxide is perfect for drawing out a betadine stain, but is diluted enough not to permanently damage any clothing. If you have ammonia in your home, that can be used for betadine stain removal as well, particularly a non-sudsing ammonia.

Beginning the Process of Removing Betadine Stains

After you have selected your treatment, you begin by soaking the cleaning agent in a cotton ball or clean wash cloth and dab it over the infected area. You should repeat this measure as many times as necessary to remove betadine stains from the clothing. If it does not come out, then the garment should be soaked in cold water mixed with one-half cup of the selected cleaning agent for a few hours. After this time, it should be laundered as usual in cold water with laundry detergent and air-dried. Do not use heat or hot water at all until the stain has been removed completely.

It is important that you test the cleaning on a small area prior to using the product on a larger portion of your clothing. This is particularly important if you need to remove betadine stains from your carpet so as to avoid permanently damaging, staining, or fading the color. Also, be cautious when handling any of aforementioned products since they can cause irritation to the lungs, eyes, skin, and digestive track.

If any of the items which need betadine stain removal are silk, such as a silk blouse or chair, it should be taken to a professional immediately to remove betadine stains. If you are using rubbing alcohol, it is important not to let it soak into the backing of the carpet because it will ruin the bond which holds the carpet together. If your carpet is wool, avoid the use of bleach or ammonia on it and instead use color-safe bleach after you have tested a small area to ensure that it will not discolor the carpet. If you have an oriental rub which is an antique or even part silk, a professional should be contacted to remove betadine stains from it.

If you need to remove betadine stains from your carpet or furniture, then you should begin by blotting a small area with a clean cloth to remove as much of the betadine as possible. Do not scrub at any point. You want to lift the betadine from the fabrics or materials, not rub it back into the fibers, permanently staining it.

You should begin blotting from the outside of the stain toward the center of the stain in order to ensure that it does not spread any further. Spray your given solution (i.e. rubbing alcohol, ammonia, or peroxide). Let it set on the betadine stain in order to loosen the dye particles from the fabric or carpet fibers. The area should be kept moist during this process, so keep the spray bottle with cold water handy.