Hydrogen Peroxide Stain Removal

Hydrogen peroxide stain removal may seem hopeless in some situations, given the incredible strength this cleaning agent has. However, there are several solutions that can help to you swiftly handle stains on a variety of surfaces.

Hydrogen Peroxide Stain Removal

Hydrogen peroxide is very often used as an effective remover of stains. It can remove stains and can also disinfect surfaces; however, it can also cause stains much like chlorine bleach can.

What You Will Need Before You Start

  • Clean absorbent towels
  • Ammonia
  • Baking soda
  • Gloves
  • Old toothbrush

Hydrogen Peroxide Stain Removal From Clothing

If you have spilled hydrogen peroxide on your favorite blouse or pair of jeans, the trick to getting the stain under control is to treat it immediately. The sooner that you can get to work on the stain, the better chance you will have of salvaging your garment.

Here are the best steps for hydrogen peroxide stain removal.

  1. Rinse the garment with cold water in order to try and remove as much of the hydrogen peroxide from the clothing.
  2. Lay a clean absorbent towel on a flat surface.
  3. Pour a tablespoon of ammonia onto a clean sponge.
  4. Dab at the stain with the sponge, starting at the outer edges of the stain.
  5. The absorbent towel may need to be replaced if it becomes saturated.
  6. After completely blotting at the stain, your next hydrogen peroxide stain removal step is to thoroughly rinse the garment in cold water.

You may need to repeat the above hydrogen peroxide stain removal steps if the stain is still present after rinsing. If the stain has been removed or at least greatly diminished, then you can proceed with washing the garment in your washing machine.

It is important to note that if you are removing a stain from silk or wool, you will need to dilute the ammonia with an equal part of cold water in order to protect the delicate fibers of the fabrics.

Hydrogen Peroxide Stain Removal From Linens

A hydrogen peroxide stain on your favorite tablecloth or even your bed linens can be very worrisome. All it takes is a stumble or a trip while walking, or the slip of your hand while treating a painful cut on, and suddenly you are faced with an unexpected stain.

In order to have the most success with the hydrogen peroxide stain removal steps, you should be sure to treat the stain as quickly as possible. Rapid action is an essential part of ensuring a successful treatment.

  1. Rinse the linen in cool water.
  2. Lay the linen down on a clean absorbent towel and blot at the stain with a clean sponge dipped in ammonia.
  3. Be sure not to rub at the stain, rather start by blotting the outer edges of the stain until you have completely covered it with the ammonia.
  4. Rinse the linen in cold water and repeat if the stain is still visible.

Another option is to create a paste using baking soda and water, if you do not have ammonia readily available. Most of us have baking soda in our pantries, which makes it a great go-to for your hydrogen peroxide stain removal emergencies.

  1. Create a paste using three parts baking soda and one part water. For example, if you use three teaspoons of baking soda, you will need to use one teaspoon of water to create your paste.
  2. Carefully rub the baking soda paste into the stain with your fingers, starting at the outer edges of the stain.
  3. Allow to set for up to fifteen minutes and rinse thoroughly to remove the paste.
  4. The linen can then be washed in your washing machine, following directions on the labels.

Hydrogen Peroxide Stain Removal From Upholstery

A spill of hydrogen peroxide on your favorite sofa or dining room table could just be enough to bring you to tears. Before you cry over spilt hydrogen peroxide, there are a few steps that you can take in order to swiftly remove the stain.

Remember, as always, the sooner that you treat the stain, the better your chances are at thoroughly removing it from your upholstered furniture.

  1. Immediately sponge the hydrogen peroxide stain with cold water so that you can try to remove as much of the solution as possible.
  2. Make a baking soda paste of three parts baking soda and one part water.
  3. Carefully scrub the baking soda paste into the upholstered surface, using an old toothbrush.
  4. Allow the paste to dry completely; this could take up to an hour.
  5. Vacuum up the dried baking soda paste and closely examine the stained area.
  6. If the stain persists then you may need to repeat the process until the stain has been thoroughly removed.

Baking soda is considered to be incredibly safe to use on most surfaces in your home. While a colorfast test is often recommended before anything is applied to upholstery, when it comes to hydrogen peroxide stain removal, you simply don’t have the time to do the colorfast test.

Hydrogen Peroxide Stain Removal From Carpets And Rugs

Spilling or dripping hydrogen peroxide on your carpet or favorite rug can really be upsetting, especially if you have darker colored carpets and rugs. All is not lost, however.

  1. Immediately sponge the stain with cool water so that you can try to remove as much of the hydrogen peroxide as possible.
  2. Make a baking soda paste, using a 3 to 1 ratio, and carefully scrub the paste into the stain using an old toothbrush.
  3. Allow the baking soda paste to dry, which could take up to an hour.
  4. Vacuum the dried baking soda paste and observe the stain.
  5. If the stain is still present then you may need to repeat the steps until the stain is gone.

Hydrogen peroxide has its place in all of our homes, especially with its ability to swiftly clean cuts and scrapes. Hydrogen peroxide stain removal doesn’t need to be a nightmare for you; just simply move as quickly as you can. When it comes to these types of stains, time is of the essence.